By July 1, 2014

How To Avoid Embroidery Mistakes

How To Avoid Embroidery MistakesEmbroidery is an art that is a hobby as well as a profession. By avoiding embroidery mistakes, you don’t only furnish your hobby and grow in it but at the same time, you can deliver best embroidery to your customers as a professional.

  1. First of all, before starting an embroidery project, you must need the instructions carefully. If you don’t read them, you might suffer a mistake in number of strands or the selection of thread in the embroidery floss.
  2. for the type of embroidery, the wrong embroidery fabric is selected. Avoid doing it. require a firm fabric foundation is required in most types of the surface embroidery. It usually has 28 or more than 28 thread count. poorly-formed stitches will be the result if a low thread count fabric is selected. A looser and lower thread count fabric is needed in case of pulled thread or counted thread embroidery projects as it facilitates the embroidery of lacy stitches.
  3. Avoid the selection of the wrong size of needle. If a too much larger embroidery needle is selected then it may result in the formation of holes in the fabric at the entry and exit points of needle. Ultimately, fabric will become puckered. Similarly, if a too small embroidery needle is selected then it will make the whole embroidery process difficult. Ultimately, it may result in unnecessary wear on thread as well as undesired fuzzies.
  4. Whenever a ball-point needle is needed, do not use a sharp needle for embroidery. when the needle and thread have to pierce the fabric, Sharp needles are used as in case of crewel and surface embroidery. used when the needle requires to slip between threads in the fabric without piercing them then Ball-point needles as in case of Hardanger embroidery, pulled thread & counted thread.
  5. In all the types of embroidery projects, knots are always avoided at starting as well as ending points. Instead of it, a new thread is used in the form of away knot, waste knot or simply by weaving it into the back side of a region that has previously been stitched. on the back of fabrics, unwanted bulk is caused by knots those results in non-flat work when it mounted or pressed.
  6. For any embroidery project, weight age of the embroidery thread also matters. It should not be too light or too heavy. thicker embroidery threads are required in case of Bold lines of embroidery while finer threads are required in case of narrow lines. a thicker strand can be made by the combination of several threads. Similarly, a single strand can be made by the separation of a floss or group of strands.
  7. An embroidery thread should always be used for embroidery. Avoid using a craft thread for embroidery purpose.
  8. A pen or pencil should always be avoided for marking of embroidery design or pattern on the fabric.
  9. an embroiderer should always use a water soluble ink, pen or pencil for marking embroidery pattern on fabric. The use of transfer pencil should always be avoided.
  10. fuzzy markings are formed or the embroidery design or pattern is distorted whenever it is iron on or press on. Always avoid this terrible mistake.

About the Author:

Comments are closed.

Embroidery Digitizing - JPGART.COM located at , , USA . Reviewed by 49 customers rated: 4.7 / 5