By July 28, 2014

Digitized Embroidery Logo Design For A Cap

Digitized embroideryAn ordinary cap can easily be converted into a personalized and unique cap by digitized embroidery. If you own a small business or a commercial business then you can embroider the logo of your company on to the cap for the promotion of your business. Your business log can easily be embroidered by yourself if you can create the template for your brand logo and you would not need to contact any specialty store for the creation of digitized logo on cap. Most of the companies are currently using branded logos for the promotion of their business. Digitized embroidery logos for caps are very much used these days. Workers and other personnel’s involved in any particular business wear these caps that have proven helpful for the identification of the business, product, service or brand.

On a lined graph paper, a template is created for the embroidery of your digitized logo. Each individual stitch is drawn. This can be done by drawing an “X” in the squares on the graphing paper as it represents the embroidery stitches of a digitized logo. To the side of the cap that you want to embroider, the embroidery logo template is pinned with the graphing paper. The stitches that you have drawn on the graph paper should face towards you. Sewing pins can be used for this purpose. It will help in holding the template of digitized logo for embroidery firmly in the right place and position on the cap where you want to embroider it.

With the color of thread that you want to use in the embroidery of your logo, sewing needles are threaded. If several different colors are used in the logo then it is instructed you to begin the embroidery process from the bottom right side of the logo and then move to the left side.

By pulling the needle and thread up through the cap, the first stitch is begun as the first stitch corresponds with the stitch on the template on the graphing paper. With the stitch on the paper, the needle is lined up. After that, needle is pulled back through the graphing paper and the cap for the completion of the first stitch.

By using the template of your Digitized Logo Design for cap, the stitching is continued. The stitches should align properly on the cap. As needed, the color of the embroidery thread should also be changed up. At this step, it should be endure that the knotted end of the thread is on the inner side of the cap. The thread is tied off on the inside of the cap after finishing the stitching of the embroidery logo on the side of the cap.

Logo designs for cap can easily be created on embroidery digitizing software by the expert embroiderers who are working with computerized embroidery machines. A separate memory card in punched in this case. In the appropriate slot of the digital embroidery machine, the card is inserted so that the logo design can easily and effectively be embroidered on the side of the cap.

Posted in: Logo Digitizing

About the Author:

Comments are closed.

Embroidery Digitizing - JPGART.COM located at , , USA . Reviewed by 49 customers rated: 4.7 / 5